Custom Wood Veneer Panels

$18,000 – $24,000

Custom-built wood veneer panels designed to bring continuous grain, crisp panel joints and real wood warmth to the walls of your home. 1BENMU fabricates each veneer panel layout from detailed shop drawings, so the grain, reveals and concealed fixings line up across the full wall.

 

  • Built to your exact measurements, with your choice of flat, fluted or slatted panels in sequenced or book-matched layouts
  • In-house shop drawings and CNC fabrication in Toronto
  • Site preparation and installation by our own crew
  • Supporting architects, designers, contractors and end clients

 

In stock


Request a Quote Book an Appointment

Category:

Wood Veneer Wall Panels for Living Rooms, Home Bars and Basements

A wood veneer panel is a thin sheet of real wood bonded to a stable MDF or plywood core. 1BENMU builds veneer wall panels for living rooms, dining rooms, bedrooms, entryways, home bars and basement media rooms.

Each wall is laid out as a set, not a stack of loose sheets. Panels can be flat, fluted or slatted, with the veneer sequenced or book-matched so the grain reads as one surface. We plan panel sizes, reveals and edge details around your walls, then fix the panels to the prepared wall with concealed fixings.

Doors, niches, lighting and service access are drawn into the panel grid from the start, so vents, switches and access points sit within the layout instead of interrupting it. Veneer also gives you large, consistent wood surfaces that stay flat across the wall.

Fitting out a office, restaurant or lobby? See our commercial wood veneer wall panels.

Oak wood veneer wall panelling with a lit niche behind a piano
White oak wood veneer wall panels with cove lighting in a basement

Our Custom Wood Veneer Panel Fabrication Process

Design and Customization: We start with your wall measurements or drawings and agree the panel profile, grain direction and joint layout. Our in-house team then produces shop drawings showing every panel, reveal, door, niche, light and access point for your approval.

Material Selection: We select the veneer by species, grain pattern and tone, then pair it with an MDF or plywood substrate that suits the panel. Veneer leaves are planned as sequenced or book-matched sets so the grain carries across the wall.

Fabrication Process: Veneer is applied to the substrate in our Scarborough shop, then panels are CNC cut to size, with profiles and service cut-outs machined to the shop drawings. Edges are finished and panels are prepared in wall order, so joints and grain line up on site.

Finishing Options: Panels can take a natural or stained finish to suit your floors, trim and millwork, applied across the set so tone stays even from panel to panel. Edge finishing and surface treatment follow the design intent.

Installation and Quality Assurance: Our crew handles the site preparation the wall needs, then installs panels across Toronto and the GTA with concealed fixings, following the approved drawings. We check joints, reveals and grain alignment, and finish with a final inspection before handover.

What to Know Before Ordering Wood Veneer Panels from 1BENMU

The best wood for veneer wall panels depends on the grain you want, and at 1BENMU we build them in white oak, red oak, walnut, maple and ash. White oak gives a calm, straight look that suits long walls, while walnut reads darker and richer. We help you match the species and grain pattern to your floors, trim and lighting.

Wood veneer panels from 1BENMU are finished with a natural or stained finish chosen to suit your interior. Because veneer leaves can take light and stain a little differently, especially in book-matched layouts, we finish panels as a set so the wall reads evenly. Edges are finished at the same stage, so exposed sides and reveals match the face of the panel.

Custom wood veneer panels from 1BENMU can start from $18,000 for a simple flat feature wall, and can go $24,000+ for more complicated projects, materials or designs. The final price depends on wall size, wood species, grain matching, panel profile and integrated doors or lighting, so we quote each project individually. To get your price, send your wall measurements, photos and any drawings. Consultations and quotes are free.

Yes, every veneer panel wall fabricated and installed by 1BENMU is covered by our workmanship warranty, which covers manufacturing and installation defects under normal use. Each project goes through our quality assurance process, starting with a review of the approved shop drawings to check dimensions, grain layout and joints. After installation, we complete a final inspection to confirm your panels meet our standards.

For most full walls, 1BENMU recommends veneer, because a stable MDF or plywood core gives you large, flat panels with real wood on the face. Veneer uses less solid timber and gives a more consistent grain and colour across a long wall. Solid wood can still suit details where the profile needs it, and we can advise on each.

At 1BENMU, book-matched veneer means neighbouring leaves are opened like the pages of a book, so the grain mirrors at each joint. Sequenced veneer means leaves stay in their cut order, so the grain carries from one panel to the next. Grain can still drift gradually along a long wall, so we plan the layout on the shop drawings before fabrication.

Yes, at 1BENMU we plan doors, niches, lighting and service access into the panel grid during shop drawings, so they follow the same joint lines as the wall. Vent slots can be cut directly into the veneer face, and cove lighting can run along the top of the panels. Share your mechanical and electrical locations early so each one lands cleanly within the layout.

Yes, we build veneer panels at 1BENMU as flat, fluted or slatted profiles, and curved work such as wrapped columns and sculpted feature walls can be drawn for your space. Flat panels suit quiet, full-height walls, while fluted and slatted profiles add shadow and depth to living rooms and accent walls. Send your drawings or a reference photo and we will review how the profile can be built.

Yes, the 1BENMU team works directly with designers, contractors and homeowners on veneer walls. We build from your design drawings, then prepare shop drawings for approval, showing panel layouts, joints and fixing details. Our in-house contractors can also prepare the wall before the panels go on, which keeps fabrication and installation under one team on your project.

Wood panelling is back in a new form, and veneer walls by 1BENMU look nothing like the dark, grooved panelling of past decades. Today’s panels use clean joints, light or rich natural species, book-matched grain, fluting and concealed doors, so the wall reads as architecture. Done this way, wood walls suit modern homes, condos and offices.

Veneer panels from 1BENMU can be used on walls, built-in cabinetry, media units and doors, which lets the same grain run across a whole room. Matching the veneer on a feature wall and the cabinets beside it is one of the most effective ways to make a space feel designed as one. Each panel is planned on the shop drawings so joints line up.

Yes, the custom wood veneer panels we fabricate at 1BENMU are installed across Toronto, the GTA and surrounding areas of Southern Ontario.

Greater Toronto Area (primary service areas): Ajax, Aurora, Brampton, East York, Etobicoke, Markham, Milton, Mississauga, Newmarket, North York, Oakville, Oshawa, Pickering, Richmond Hill, Scarborough, Thornhill, Vaughan and Woodbridge.

Southern Ontario (depending on the project): Barrie, Bolton, Burlington, Collingwood, Georgetown, Guelph, Hamilton, Innisfil, Orangeville, Orillia, Keswick, King City, Kitchener, Midland and Waterloo.

Installation covers everything from site preparation and fitting to alignment and final finishing, and is completed by our experienced in-house team for full control over quality and execution.

Related Projects

Ready to Order Custom Wood Veneer Panels?

Send us your drawings, or your measurements and photos, and our team will review your wood veneer panel project and prepare a free quote.

1710 Midland Ave Unit 7, Scarborough, ON