Slat Partitions That Zone Offices, Restaurants and Salons
1BENMU builds wood slat dividers for offices, restaurants, salons, clinics, hotel lobbies and retail stores. A slat partition marks where one zone ends and the next begins, while light and air keep moving and staff can still see across the floor.
Dividers can run floor to ceiling, stop at partial height or sit on a cabinet or counter. They can screen a waiting area from a work area, separate tables in a dining room or give meeting space some privacy, with spacing set by how much you want to hide.
Because no full-height wall is being built, a slat divider is a lighter way to change how a floor works. It is fixed to the floor, ceiling or nearby structure, and the wood is matched to the rest of your millwork.
Planning this for your home? See our wood slat room dividers for homes.
Our Commercial Wood Slat Room Divider Fabrication Process
Design and Customization: We start with your floor plan or design drawings and how staff and customers move through the space. Our in-house team then plans height, slat spacing and fixing points and prepares shop drawings for approval by your designer, contractor or landlord.
Material Selection: Slats are made in hardwood matched to your floors and millwork, in white oak, red oak, walnut, maple or ash, with straight grain for tall runs.
Fabrication Process: Slats are CNC cut in our Scarborough shop so each piece matches, then prepared with base and ceiling details from the shop drawings.
Finishing Options: The wood can be stained or finished to suit your interior, with faces and sides finished evenly since both show from every side of the floor.
Installation and Quality Assurance: Our crew installs your divider across Toronto and the GTA, handling the site preparation needed and working around the other trades on your build. We finish with a final inspection against the approved drawings before handover.
What to Know Before Ordering Commercial Slat Room Dividers from 1BENMU
How much do commercial wood slat room dividers cost?
Commercial wood slat room dividers from 1BENMU can start from $5,000 for a simple vertical divider, and can go $8,000+ for more complicated projects, materials or designs. The final price depends on height, length, spacing, wood species and fixing method, so we quote each project individually. To get your price, send your floor plan or measurements and photos. Consultations and quotes are free.
What wood works best for a commercial divider?
The best wood for a 1BENMU commercial divider is a straight-grained hardwood that stays stable over tall runs. We build in white oak, red oak, walnut, maple and ash. Because a divider stands in the middle of the floor, it gets touched and bumped more than a wall feature, so we help you pick a species and finish that suit the traffic.
How is a commercial divider finished?
Every commercial divider from 1BENMU is stained or finished to match your floors and surrounding millwork. Customers see both sides as they walk past, so faces and sides get the same finish. Share your finish schedule or a sample of the materials nearby, and we will plan around them and confirm the result with you before fabrication starts.
Will a slat divider give our staff or clients privacy?
A divider from 1BENMU softens sightlines rather than fully blocking them, and closer spacing screens more. It suits waiting areas, dining tables and open work floors, but rooms needing real sound or visual privacy, such as treatment rooms, still need a full wall. Tell us what the zone is for, and we will set the spacing to match.
Can you work with our general contractor?
Yes, general contractors, designers and architects regularly work with 1BENMU on commercial dividers. Send your drawings and we will prepare shop drawings for approval, showing each fixing to the floor and ceiling. We coordinate with your team so blocking, flooring and the ceiling grid are ready for us, and the divider goes in at the right stage of your build.
Do you offer a warranty on commercial dividers?
Yes, every commercial slat divider fabricated and installed by 1BENMU is covered by our workmanship warranty, which covers manufacturing and installation defects under normal use. Each project goes through our quality assurance process, starting with a review of the approved shop drawings. After installation, we complete a final inspection to confirm the work meets the high standards we set for every commercial project.
Do you install commercial slat room dividers in Toronto?
Yes, the commercial wood slat room dividers we fabricate at 1BENMU are installed across Toronto, the GTA and surrounding areas of Southern Ontario.
Greater Toronto Area (primary service areas): Ajax, Aurora, Brampton, East York, Etobicoke, Markham, Milton, Mississauga, Newmarket, North York, Oakville, Oshawa, Pickering, Richmond Hill, Scarborough, Thornhill, Vaughan and Woodbridge.
Southern Ontario (depending on the project): Barrie, Bolton, Burlington, Collingwood, Georgetown, Guelph, Hamilton, Innisfil, Orangeville, Orillia, Keswick, King City, Kitchener, Midland and Waterloo.
Installation covers everything from site preparation and fitting to alignment and final finishing, and is completed by our experienced in-house team for full control over quality and execution.
Ready to Order Commercial Wood Slat Room Dividers?
Send us your drawings, or your measurements and photos, and our team will review your commercial wood slat room divider project and prepare a free quote.
1710 Midland Ave Unit 7, Scarborough, ON
