Custom Bathroom Vanities

The best wood for a bathroom vanity is a stable hardwood that takes a good protective finish, and 1BENMU builds vanities in white oak, red oak, walnut, maple and ash. White oak is a popular choice because it is dense and naturally resists moisture, and we help you choose the species that suits your tile, floors and trim.

The wood on a vanity from 1BENMU is stained or clear finished to suit your interior, then protected for daily contact with water and humidity. Sealing matters most where moisture collects, including sink cut-outs, cabinet bases and the bottom edges of doors. We confirm the finish, colour and sheen with you during the shop drawing stage, before fabrication begins, so it matches your other bathroom finishes.

Custom bathroom vanities from 1BENMU can start from $2,000 for a simple single-basin vanity, and can go $3,500+ for more complicated projects, materials or designs. The final price depends on the width, wood species, countertop, basin count and drawer layout, so we quote each project individually. To get your price, send your measurements, a photo of the space and any drawings you have. Consultations and quotes are free.

We build both at 1BENMU, and the right choice depends on your plumbing, walls and storage needs. A floating vanity leaves the floor open and suits smaller rooms, but it relies on solid wall framing and a drain that exits through the wall. A floor-mounted vanity is more forgiving of plumbing locations and gives you deeper storage down to the floor.

Yes, the team at 1BENMU designs each vanity around your layout and plumbing. We note your drain and water line locations on the shop drawings, then plan drawers, shelves and cut-outs around them, so the storage works without fighting the pipes. If you are still choosing between basin positions, send us a photo of the wall and we can review what fits.

Every vanity from 1BENMU can be topped with stone, solid timber or microcement, paired with an integrated or drop-in basin. Stone gives you the widest choice of pattern and colour, while solid timber carries the wood of the cabinet up to the counter. Microcement creates a seamless surface with no visible joints. We plan the top and basin together, so the cabinet below fits them exactly.

Yes, you are welcome to send your drawings to 1BENMU, and our team will review them and prepare a free quote. We regularly work with homeowners, interior designers, architects and contractors, turning their plans into detailed shop drawings for approval before fabrication. If your contractor is handling the rest of the bathroom, we coordinate measurements and vanity details so the unit fits your finished walls and plumbing.

Yes, every vanity fabricated and installed by 1BENMU is covered by our workmanship warranty, which covers manufacturing and installation defects under normal use. Each vanity goes through our quality assurance process, starting with a review of the approved shop drawings to check dimensions, materials and joinery. After installation, we complete a final inspection to confirm your vanity meets the high standards 1BENMU sets for every project.

A wood vanity from 1BENMU handles a busy bathroom well when it is sealed properly and the room is ventilated. Solid wood moves with humidity, so we finish every face, protect edges and cut-outs, and pair the cabinet with a stone or quartz top that keeps water off the wood. A good exhaust fan does the rest by clearing moisture after showers.

Vanity size depends on who uses the room, and at 1BENMU we make single-sink vanities, double vanities and compact powder room units to your measurements. As a general guide, single vanities run about 24 to 48 inches wide, double vanities about 60 to 72 inches, and powder room units 16 to 24 inches, with a standard depth near 21 inches. We fit the final size to your plumbing and space.

Awkward bathrooms are where a custom vanity from 1BENMU helps most, since it is built to the space instead of a standard width. A vanity can be made shallower to clear a door, shaped around a corner or bulkhead, or run wall to wall to use an odd recess. The result is a bathroom that works as one layout instead of fighting the room.

Yes, the custom bathroom vanities we fabricate at 1BENMU are installed across Toronto, the GTA and surrounding areas of Southern Ontario.

Greater Toronto Area (primary service areas): Ajax, Aurora, Brampton, East York, Etobicoke, Markham, Milton, Mississauga, Newmarket, North York, Oakville, Oshawa, Pickering, Richmond Hill, Scarborough, Thornhill, Vaughan and Woodbridge.

Southern Ontario (depending on the project): Barrie, Bolton, Burlington, Collingwood, Georgetown, Guelph, Hamilton, Innisfil, Orangeville, Orillia, Keswick, King City, Kitchener, Midland and Waterloo.

Installation covers everything from site preparation and fitting to alignment and final finishing, and is completed by our experienced in-house team for full control over quality and execution.