Aesthetic Clinic Construction & Renovation in Toronto

Aesthetic clinic construction and renovation costs in Toronto range from approximately $100 to $400+ per square foot. A 1,800 sq. ft. skin treatment clinic, for example, could represent an investment of roughly $250,000 to $425,000+, depending on the number of treatment rooms and existing conditions.

Lighter aesthetic clinic renovations and refreshes can fall toward the lower end of that range, while complete build-outs with multiple treatment rooms and dedicated electrical circuits for laser or IPL equipment tend to fall toward the middle to upper part of the range. High-end and luxury aesthetic clinics with premium finishes and extensive custom millwork sit at the very top.

The cost depends on the size of the space, the number of treatment rooms, the mix of laser, injectable and skincare services offered, the existing condition of the property, and how much of the project involves construction versus custom millwork. A reception and single-treatment-room refresh costs far less than a complete clinic build-out with multiple treatment rooms, consultation areas and a retail wall. Larger spaces can also have a lower cost per square foot because fixed clinic construction costs are spread across more floor area.

1BENMU provides an estimate after the initial site review, with construction and custom millwork broken out separately, so you can see where the project costs are going before committing to the work.

Yes. 1BENMU partners with experienced architects to handle the drawings, documentation and approvals required for aesthetic and cosmetic clinic renovations and build-outs. Commercial clinic renovations must comply with the Ontario Building Code (OBC), applicable municipal fire and safety requirements, and accessibility requirements.

Architectural and engineering coordination may be required when laying out treatment rooms and consultation areas, adding sinks and plumbing, changing ventilation, upgrading electrical for equipment, adding or moving partitions, changing exits or corridors, or converting a retail or office unit into a clinic. Our team coordinates the required architectural drawings, professional stamps, and mechanical, electrical, plumbing, fire and life-safety, and accessibility requirements.

As for permits, requirements depend on the scope of the work. A building permit is commonly required when the work involves new or moved partitions for treatment rooms, plumbing changes for sinks or washrooms, or changes affecting exits or corridors. New paint or replacement flooring on its own typically does not.

1BENMU identifies permit requirements during the design stage and coordinates submissions and required inspections, so the project is properly documented and approved before and during construction.

Yes, 1BENMU completes aesthetic treatment clinic renovation, construction and custom millwork projects across Toronto, the GTA and surrounding areas of Southern Ontario, including:

Greater Toronto Area (primary service areas)

• Ajax
• Aurora
• Brampton
• East York
• Etobicoke
• Markham
• Milton
• Mississauga
• Newmarket
• North York
• Oakville
• Oshawa
• Pickering
• Richmond Hill
• Scarborough
• Thornhill
• Vaughan
• Woodbridge

Southern Ontario (depending on the project)

• Barrie
• Bolton
• Burlington
• Collingwood
• Georgetown
• Guelph
• Hamilton
• Innisfil
• Orangeville
• Orillia
• Keswick
• King City
• Kitchener
• Midland
• Waterloo

1BENMU works with aesthetic clinics on both complete interior renovations and specialized custom millwork projects. A project can involve transforming an entire commercial space, or a focused scope such as treatment-room cabinetry, reception desks, locking storage, retail display walls and other architectural millwork. This allows us to work across a wide range of aesthetic clinic businesses, including:

• Laser hair removal and skin resurfacing clinics
• Injectable clinics (Botox, dermal fillers)
• Medical aesthetics and cosmetic dermatology-adjacent clinics
• Skincare and facial treatment clinics
• Body contouring and sculpting clinics
• Med-spa treatment clinics
• Multi-practitioner aesthetic clinics
• Consultation offices for cosmetic practitioners

Each type of aesthetic clinic changes the room mix and daily workflow, so the scope, layout and millwork are planned around how it runs.

Yes. 1BENMU can work from plans developed by your architect or interior designer and carry those details through construction, millwork fabrication and installation. For an aesthetic clinic, this matters most for custom reception areas, treatment-room cabinetry, product displays and feature walls that need to fit precisely within the finished space.

Our team reviews the drawings against actual site conditions and resolves dimension, material or detail questions with the design team before fabrication rather than after cabinetry reaches the site. This lets your architect or designer stay focused on the overall design while 1BENMU handles the construction and fabrication needed to build it.

Yes. 1BENMU details every piece of custom millwork through shop drawings before fabrication begins, covering reception desks, treatment-room cabinetry, consultation-room built-ins, retail displays, storage and feature walls.

These drawings set dimensions, materials and finishes before pieces are produced at our Scarborough shop, and account for actual room dimensions, sinks, equipment and electrical locations that affect the finished millwork. Where an architect or interior designer is involved, we review the shop drawings against their design before fabrication proceeds, so details get resolved on paper instead of on site, and the millwork reflects both the approved design and real clinic conditions.

Yes. 1BENMU measures the actual space and fabricates each piece at our Scarborough shop around real clinic conditions, rather than relying on standard cabinet dimensions. That matters in existing commercial units where walls aren’t square, columns interrupt a room, storage space is limited, or cabinetry needs to fit around treatment equipment and plumbing.

We build reception desks, retail displays and feature walls around architectural details that prefabricated cabinetry can’t accommodate. Because our team handles design, fabrication and installation together, site conditions get built into the shop drawings before production, so the cabinetry fits the clinic instead of the other way around.

Based on our completed beauty clinic and related commercial projects, an aesthetic clinic renovation typically takes 4–8 weeks of on-site construction, depending on the size, existing condition and scope of the project.

A smaller renovation focused on finishes, the reception and waiting area or limited millwork may take 2–3 weeks, while a complete aesthetic clinic build-out involving treatment rooms with sinks, a consultation room, new plumbing, electrical, HVAC, washrooms and extensive millwork can take 2–4 months.

For example, an average-sized injectables or skincare clinic with reception, a consultation room and two or three treatment rooms may take around 4–6 weeks of construction. A laser clinic, medical aesthetics clinic or body contouring clinic with additional treatment rooms and a retail area may take around 8–12 weeks when much of the existing infrastructure can be retained. Projects involving major plumbing, dedicated electrical, ventilation or other building-system changes can extend beyond that range.

For projects starting before construction drawings and permits are complete, design development, architectural and engineering drawings, permits and pre-construction typically add 2–3 months before construction begins.

What affects the schedule:

• Starting condition: Renovating an existing clinic is different from converting a retail, office or unfinished shell into an aesthetic clinic.
• Design stage: We can work from completed architectural drawings or coordinate the design, drawings and required documentation with our architectural partners.
• Permits and approvals: When building permits or other regulatory requirements apply, we account for them before establishing the construction start date rather than treating approval time as part of the construction schedule.
• Project scope: Treatment rooms, hand sinks, dedicated electrical for treatment devices, ventilation, HVAC, accessibility work and structural changes all affect how much work needs to happen on site.
• Equipment and materials: Owner-supplied items such as laser devices, treatment equipment and treatment chairs, along with specialty finishes and other long-lead materials, can affect the schedule depending on availability and installation requirements.
• Custom millwork: The amount and complexity of custom millwork affect the schedule, but our fully equipped in-house millwork shop, with CNC routers, edge banders, a spray booth and more, gives us the capacity to produce reception desks, treatment room cabinetry, retail displays and other millwork efficiently while renovation work progresses on site, instead of waiting for construction to finish.

Your aesthetic clinic project gets a dedicated 1BENMU project manager who follows the work from planning through construction, millwork installation and final walkthrough, one point of contact for questions, scheduling and progress.

They coordinate site construction, required trades and the custom millwork being fabricated at our Scarborough shop, which matters when treatment rooms, reception, cabinetry, finishes and equipment requirements all need to land on the same schedule. We also run project-management software with AI-driven tracking to follow progress and flag issues before they affect the next stage, so you know where the project stands without chasing separate contractors for updates.

Both. 1BENMU takes on the complete interior renovation of an aesthetic clinic, including construction, trade coordination, finishes and custom millwork, or a more focused millwork-only scope within an existing clinic. A full project can include treatment and consultation rooms, reception and waiting areas, washrooms, flooring, partitions, finishes and cabinetry fabricated in-house.

If your clinic is already operating or another contractor is handling construction, we can focus purely on millwork: a new reception desk, treatment-room cabinetry, retail displays, storage or wall panelling. The scope doesn’t need to be a full renovation to work with us.

1BENMU runs construction and custom millwork as one project, so you’re not managing two separate contracts. Our team develops the shop drawings alongside the construction plans, so cabinetry is designed against real site conditions instead of guessed dimensions.

Site work and fabrication run in parallel at our Scarborough shop, so millwork isn’t waiting on construction to finish first. If something on site changes, a moved wall, a relocated outlet, an adjusted plumbing line, our team resolves it directly instead of passing it between separate companies. That gives you tighter control over the final fit and finish, since the same 1BENMU team that built the space also built and installed the millwork inside it.